Converting mods to Locomotion
Moderator: Locomotion Moderators
- montanna.27
- Engineer
- Posts: 75
- Joined: 07 Feb 2010 22:16
- Location: Australia
Re: Converting mods to Locomotion
tryed all that i am running windows 7 64bit
have you danced with the devil in the pale moon light
- Walter1940
- Tycoon
- Posts: 988
- Joined: 19 Mar 2007 01:30
- Location: Munich, Germany
- Contact:
Re: Converting mods to Locomotion
Actually, it should work with this operating system.
But I've also tried it with Windows 7 32-bit before. And because it was not working. That's why I go back to using Windows XP. But this is not a permanent solution.
I believe that I can't help you.
But I've also tried it with Windows 7 32-bit before. And because it was not working. That's why I go back to using Windows XP. But this is not a permanent solution.
I believe that I can't help you.
http://www.walter1940.de
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
- montanna.27
- Engineer
- Posts: 75
- Joined: 07 Feb 2010 22:16
- Location: Australia
Re: Converting mods to Locomotion
could i get u to do the conversion for me once i get it to the point of using vehicle creator i will be fine
have you danced with the devil in the pale moon light
- Awesometrains
- Traffic Manager
- Posts: 129
- Joined: 22 Nov 2015 17:07
Re: Converting mods to Locomotion
don't download dll's from DLL sites , lots of them are viruses
ive got a Windows XP PRO computer right next to me , pm me if you want DLL
ive got a Windows XP PRO computer right next to me , pm me if you want DLL
Qa'pla!
- Walter1940
- Tycoon
- Posts: 988
- Joined: 19 Mar 2007 01:30
- Location: Munich, Germany
- Contact:
Re: Converting mods to Locomotion
Sorry, but is this a joke? I doubt that you own all the .dll files. You just always write trash.
http://www.walter1940.de
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
- Awesometrains
- Traffic Manager
- Posts: 129
- Joined: 22 Nov 2015 17:07
Re: Converting mods to Locomotion
if you mean "own" as in "do you have the right to distribute" , then no I do not have the rightWalter1940 wrote:Sorry, but is this a joke? I doubt that you own all the .dll files. You just always write trash.
if you just mean "do you have the files" then yes , I have the files
Qa'pla!
- Walter1940
- Tycoon
- Posts: 988
- Joined: 19 Mar 2007 01:30
- Location: Munich, Germany
- Contact:
Re: Converting mods to Locomotion
I doubt that you have all the .dll files.
Why should one write to you when it comes much easier? I think you make yourself only important.
Furthermore, your assertion is false, spread the virus such sites. Each has a virus Scaner with which he can examine the files. Please do not spread such falsehoods.
Why should one write to you when it comes much easier? I think you make yourself only important.
Furthermore, your assertion is false, spread the virus such sites. Each has a virus Scaner with which he can examine the files. Please do not spread such falsehoods.
http://www.walter1940.de
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
- Awesometrains
- Traffic Manager
- Posts: 129
- Joined: 22 Nov 2015 17:07
Re: Converting mods to Locomotion
its something I've read online....Walter1940 wrote:I doubt that you have all the .dll files.
Why should one write to you when it comes much easier? I think you make yourself only important.
Furthermore, your assertion is false, spread the virus such sites. Each has a virus Scaner with which he can examine the files. Please do not spread such falsehoods.
and yes I DO have DLL files (if we are talking about 32-Bit Windows XP Service Pack 2/3 Professional)
and what if the virus infects your computer BEFORE you scan it...
Qa'pla!
- Walter1940
- Tycoon
- Posts: 988
- Joined: 19 Mar 2007 01:30
- Location: Munich, Germany
- Contact:
Re: Converting mods to Locomotion
I have finally found a solution when msts2locomotion is not working.
I have tried a lot. And finally I can work with Windows 7 64-bit.
I installed the program Route Riter. This program consists of several elements. Some of it has enabled me to continue working.
http://msts.steam4me.net/Route_Riter/index.html
EDIT:
I forgot. I searched dx7vb.dll and dx8vb.dll on the Internet and put into the folder "windows \ system32". If you have a subfolder in the folder Windows is called "SysWOW64", then the files "comctl32.ocx" and "trainlib.ocx" must synonymous there.
I have tried a lot. And finally I can work with Windows 7 64-bit.
I installed the program Route Riter. This program consists of several elements. Some of it has enabled me to continue working.
http://msts.steam4me.net/Route_Riter/index.html
EDIT:
I forgot. I searched dx7vb.dll and dx8vb.dll on the Internet and put into the folder "windows \ system32". If you have a subfolder in the folder Windows is called "SysWOW64", then the files "comctl32.ocx" and "trainlib.ocx" must synonymous there.
http://www.walter1940.de
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
Re: Converting mods to Locomotion
Hi,
I am trying for a while to use msts2loco with no luck. After following all the instructions described here and in the tutorial I am able to start the app, but when I try to open any model I always get and "automation error". Searching in Google points to a missing VB library, but hard to know without the code. I have install VB and .net fws with no success.
I have tried in both windows 10 and 7 (where I remember to run it years ago without problem).
Run out of ideas about how to solve the issue, any thoughts?
I am trying for a while to use msts2loco with no luck. After following all the instructions described here and in the tutorial I am able to start the app, but when I try to open any model I always get and "automation error". Searching in Google points to a missing VB library, but hard to know without the code. I have install VB and .net fws with no success.
I have tried in both windows 10 and 7 (where I remember to run it years ago without problem).
Run out of ideas about how to solve the issue, any thoughts?
- Walter1940
- Tycoon
- Posts: 988
- Joined: 19 Mar 2007 01:30
- Location: Munich, Germany
- Contact:
Re: Converting mods to Locomotion
Wait, let me summarize briefly.
You have done everything in here and get under Windows 7, the program msts2loco not to run?
Did you also load the Route Ritter and try to open the MSTS model with the attached ShapeViewer? Or, in other words, is the model a MSTS file? It does not work for other formats.
Please make a screenshot of the error message or how it looks like. It's hard to understand without proper clue.
You have done everything in here and get under Windows 7, the program msts2loco not to run?
Did you also load the Route Ritter and try to open the MSTS model with the attached ShapeViewer? Or, in other words, is the model a MSTS file? It does not work for other formats.
Please make a screenshot of the error message or how it looks like. It's hard to understand without proper clue.
http://www.walter1940.de
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
Vehicles for Locomotion
Tutorials in english
- From MSTS to Locomotion ---> http://www.walter1940.de/tutorial/msts2loco/
- Wally ---> http://www.walter1940.de/tutorial/wally/
- xml-modding ---> http://www.walter1940.de/tutorial/xml-modding/
Re: Converting mods to Locomotion
Thanks for your answer, was actually helpful.
As Msts2Loco started I did not install route riter.
When reading the installation docs for routeriter and shape viewer I saw in the later the same error I was getting, and it was explained there the reason behind was "out of memory"
I increased the amount of memory (I am using virtual machines) and then I finally got it to work
Thank you for helping me out
As Msts2Loco started I did not install route riter.
When reading the installation docs for routeriter and shape viewer I saw in the later the same error I was getting, and it was explained there the reason behind was "out of memory"
I increased the amount of memory (I am using virtual machines) and then I finally got it to work
Thank you for helping me out
Who is online
Users browsing this forum: No registered users and 3 guests