My first map

Got a nice scenario or saved game for Locomotion? Post it here!

Moderator: Locomotion Moderators

Post Reply
Coen
Engineer
Engineer
Posts: 22
Joined: 06 May 2013 08:18
Location: Belgium

My first map

Post by Coen »

Hello to you all,

This is the fist map that i want to share with you.
Any comment is welcome.

Coen


https://www.dropbox.com/s/ibk5109r9ckwfff/Map01.png
User avatar
Owen-Alexander
Engineer
Engineer
Posts: 79
Joined: 19 Jun 2008 11:30
Location: Australia

Re: My first map

Post by Owen-Alexander »

Nice Map!

I noticed in the image that you are using the red earth (from the provo scenario), is that true and was wondering if there is less modded version as some (if not all people prefer mod-less versions).

However, It looks very good for your first map, and I was wondering if you could put some more details on the challenge, region, start year, recommended mods (to add in) and a download (if it is ready).
Coen
Engineer
Engineer
Posts: 22
Joined: 06 May 2013 08:18
Location: Belgium

Re: My first map

Post by Coen »

Hello Owen,

Yes, the red earth is indeed from he provo scenario. Further i had no details what so ever of a challenge, start date, region.
If you want it i can make a mod free one? More detail follows about installed mod,challenge, start date and region.

I was wandering if the lay-out was exepteble?

Greetings,

Coen
User avatar
Owen-Alexander
Engineer
Engineer
Posts: 79
Joined: 19 Jun 2008 11:30
Location: Australia

Re: My first map

Post by Owen-Alexander »

The layout is fine. The middle could have a few hills or varying terrain as it seems a bit too flat.

In regards to the red earth, remove it for a mod-free version but if the original look is something important have a modded version that states specifically what mods are in and where to get them.

Also is there an intended route for players to go (so they don't skip parts or ruin the look), if there is have a look at the Boundary Marker.

[REL] Boundary Markers

Other than that, looks ready to play.
Coen
Engineer
Engineer
Posts: 22
Joined: 06 May 2013 08:18
Location: Belgium

Re: My first map

Post by Coen »

Thanks for your comment Owen, I wil make a few changes in the landscape.

This is what i installed but i have no scenario yet

dekosoft_up_pack.1.0.6
digidampfman_station_kits_1-4
NMBS-SNCB HLE18 (Alsthom)
NMBS-SNCB M6
BetterRoads_0_8
Boundary Fence
Der Super-Baum
Earth_Slopes
NLBuses_1_0
NLSTATIONS
zeaks_buildings_pack_ver_1.1
quinzeedied-ns-railhopper-for-locomotion
grain elevator
Attachments
Somewhere in the world-blanco.zip
This is a blanco map
(90.14 KiB) Downloaded 185 times
User avatar
Owen-Alexander
Engineer
Engineer
Posts: 79
Joined: 19 Jun 2008 11:30
Location: Australia

Re: My first map

Post by Owen-Alexander »

Ok, Bit of a list but that doesn't matter (most of that stuff is trains and not applied at this point), I saw that another earth tile is installed (Sand2) so same as my other comment on earth tiles (have it there or not, your call) also it has the digidampfman station kit 4 on the landscape (this maybe from the standard track file) so you may want to deselect them before putting out the scenario. Other than that it is pretty standard, and I'll have a play of it soon.

Could get a link for the following items:

quinzeedied-ns-railhopper-for-locomotion
Der Super-Baum
NMBS-SNCB HLE18 (Alsthom)
NMBS-SNCB M6
NLBuses_1_0
NLSTATIONS
BetterRoads_0_8

Its just I haven't seen them before or I am forgetting.
Coen
Engineer
Engineer
Posts: 22
Joined: 06 May 2013 08:18
Location: Belgium

Re: My first map

Post by Coen »

User avatar
Owen-Alexander
Engineer
Engineer
Posts: 79
Joined: 19 Jun 2008 11:30
Location: Australia

Re: My first map

Post by Owen-Alexander »

Ok, they are not on the landscape so it is not too big of deal of putting stuff on later. I would at this point keep a back-up of the landscape to work on the final scenario because it is looking good at this point even with the earth textures in (might want to temporarily remove the station kit 4 items so it is as mod-less as possible).
User avatar
Zakos
Tycoon
Tycoon
Posts: 3977
Joined: 15 Mar 2012 02:48
Location: in my mum's car
Contact:

Re: My first map

Post by Zakos »

Perhaps include some screenshots on the first post?
Coen
Engineer
Engineer
Posts: 22
Joined: 06 May 2013 08:18
Location: Belgium

Re: My first map

Post by Coen »

Included the scenario.
I've set no time limit because i don't know if this possible to achieve.
I've edited the map with some more detail hope you like it.

If there some problems, i like hear them

@ Zakos: screenshot are following.

Greetings,
Coen
Attachments
Deliver 1 M crates of goods to the people.SC5
(825.64 KiB) Downloaded 160 times
User avatar
Owen-Alexander
Engineer
Engineer
Posts: 79
Joined: 19 Jun 2008 11:30
Location: Australia

Re: My first map

Post by Owen-Alexander »

This might be an odd question but can I please get a version of the scenario without any of the extra vehicles, since there are some vehicles on the map that I cannot find even with installing all the packs you have put up that you have said are in there.

It may also be a good idea to have a version (maybe the same I am asking for) that has default locomotion items on it.
User avatar
Zakos
Tycoon
Tycoon
Posts: 3977
Joined: 15 Mar 2012 02:48
Location: in my mum's car
Contact:

Re: My first map

Post by Zakos »

Very true; I second that. Usually before you add mods it's a good idea to post a "clean" version of it.
Coen
Engineer
Engineer
Posts: 22
Joined: 06 May 2013 08:18
Location: Belgium

Re: My first map

Post by Coen »

Hello,

You are right Zakos about posting a clean version of the map.

But now i have bigger problems. My harddrive crashed so no computer at the moment, i'm writing this at my wife's laptop.
So i can't give you any feedback and help if you need some

But if i'm to be able to make a new map and scenario i wil give you also a clean one.

Greetings and a good game time to all of you,

Coen
Post Reply

Return to “Locomotion Scenarios and Saved Games”

Who is online

Users browsing this forum: No registered users and 3 guests